What inseam works at 5 foot 7
Key takeaways
- Full length at 5 foot 7 is close to 30 inches with a flat shoe.
- Ankle length is roughly 2 inches shorter than full length on the same body.
- Regular inseams usually fit at this height; tall is cut for longer legs, not simply taller people.
- Torso length changes where the waistband sits, not where the hem lands.
The number and where it comes from
A full-length inseam sits at roughly 45 percent of height for most people. At 5 foot 7, which is 67 inches, that puts full length near 30 inches. This is a starting point for reading a size chart, not a measurement of you: two people at the same height can differ by two inches in leg length, and the chart cannot see that. Measure the inseam of a pair you already like, from the crotch seam straight down the inside leg to the hem, and compare that number against the chart instead.
Ankle, full and cropped at this height
Ankle length is cut to stop at or just above the ankle bone, which is about 2 inches shorter than full length on the same body. At 5 foot 7 that is roughly 28 inches. Cropped sits higher again and is usually stated by the brand rather than derived. The reason these labels drift between brands is that each one draws them against its own fit model, so a pair labelled ankle in one range can arrive at the length another brand calls full.
Why regular usually works and when tall does not
Most brands cut regular around a 30 inch inseam, which is why 5 foot 7 generally lands in regular. Tall ranges are drafted for longer legs, and a well-made tall range moves the knee shaping and the pocket placement down with the extra length rather than only adding hem. If you take regular and it is short, check whether your leg length is above average for your height before moving to tall — a hem alteration on a regular pair keeps the knee in the right place, and a tall pair does not if your legs are not actually long.
What the shoe does to the answer
Every inseam decision assumes a shoe height. A low heel adds about an inch to the length you need before the hem breaks in the same place. If you wear one shoe height nearly always, choose the inseam for that shoe and accept that the pair will read differently with anything else. If you split your time, the safer choice is the shorter length, because a hem that is slightly high reads as intentional and one that drags does not.
Related questions
- inseam for 5 foot 7
- regular inseam length women
- pant length for 5 7 woman
- do i need tall at 5 7
Related guides
Frequently asked questions
- Do I need tall jeans at 5 foot 7?
- Usually not. Most brands cut regular near a 30 inch inseam, which is close to full length at this height. Tall is drafted for longer legs rather than for greater height, so check your own inseam before switching ranges.
- What inseam is ankle length at 5 foot 7?
- Around 28 inches, about 2 inches shorter than full length. Brands label this differently, so read the published inseam rather than the word.
- Why do two pairs with the same inseam sit differently?
- Because rise and leg opening change where the fabric falls. A wider leg opening drapes lower over the shoe at the same inseam than a narrow one does.
Sources
- Jeans - Wikipedia
Background reference for the definitions used in this guide.
Accessed September 5, 2026
- JEGINS Fit measurement standard
Our published editorial standard for the figures used in this guide.
JEGINS Fit · Accessed September 5, 2026
Scope and limits of this guide
This guide describes what we have measured or sourced. It does not cover every brand, and body measurements vary: use it as a starting point and check the specific product page for its evidence level before buying.
Fit glossary · How we test · Editorial policy · Affiliate disclosure
